Company Info





Home > Suppressors > AB SUPPRESSORS
Sort By:
Page of 1
AB Suppressor Little Bird-.22 LR AB Suppressor Raptor 8-Stack- 7.62 with Reflex 2" mount AB Suppressors Sabre SS- 9mm

AMERICA'S MOST POPULAR CALIBER

DESERVES A PROPER SUPPRESSOR

Originating from the need to easily adjust baffle spacing for product testing, the Little Bird’s patent-pending design has proven very effective. The threaded interior allows baffles to be adjusted for tuning and self-cleaning; a unique feature unmatched in the industry.

  • No unnecessary Baffle spacers or baffle extensions taking up valuable internal volume.

  • ID Threads act as an effective turbulator that reduces energy from the blast.

  • Increased ID surface area to reduce thermal energy from the blast.

  • Baffles have a threaded tap like feature on the OD to clean the suppressor as they are removed.

  • Ability to tune baffle spacing for each unique cartridge including 17 HMR, 22LR, 5.7 x 28, and 22 Hornet.

The result is an ultra lightweight and more effective design that is simple to service.

Built to serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners face, the RAPTOR comes in a variety of lengths based on spiral configurations. Each suppressor connects via the recommended REFLEX mounting system or flush mount.

The RAPTOR uses spiral shaped baffles to keep the gasses moving while reducing back pressure. The result is our flagship suppressor. Utilizing the REFLEX mounting options greatly increases the suppressor volume without increasing the overall length of the firearm. The RAPTOR comes in 5.56, 7.62, .338 and lengths from 2 spirals to 10 spirals and REFLEX mounting options from 1.00” to 8.00”.

The AB Spiral Versus Dead End Baffles

Plain and simple, our spirals are designed to be more efficient. Using spirals verses baffles gives the gases something to do rather than slamming into a wall or corner. By peeling gases off of the bore and sending them into a spin we can reduce the energy of those gases quickly and efficiently. As the gases lose energy the spiral can be fed with more gases. This spinning effect burns off energy rather than trying to stop it.


Raptor Technology
Titanium
With 100% Titanium construction, we achieve a longer life for the suppressor and also keep the weight at a minimum to allow for better accuracy and performance.

Spiral Technology
AB Spiral Technology significantly reduces the back pressure created with each shot. The reduced pressure also creates a much lower tone, making for a better shooting experience.


Welded Construction

Welded construction allows for an increased internal volume for optimal performance while adding durability to the overall build of the can.


High Temp Cerakote
Cerakote high temp is the industry-leading thin film coating. We choose this because it withstands Full Auto temperatures without failing.


Mounts and Endcaps
Interchangeable mounting systems and end caps allow the RAPTOR Series to be used on multiple calibers and platforms. Using the correct end cap for each caliber increases performance and is critical to maximum suppression.

A 9MM PISTOL-CALIBER CARBINE SUPPRESSOR MADE FOR THE

CZ SCORPION AND AR-15

The Sabre is a very specialized suppressor with industry-leading suppression, short added length, reduced blowback and reduced bolt speed. This is accomplished with a fully welded titanium 9mm suppressor with 2" of built in reflex. Custom made for law enforcement spec CZ Scorpions, but also fits most 9mm AR-15 models with 1/2x28 threads.

AB Suppressor Raptor 4-Stack- 5.56 with Reflex 1" Mount AB Suppressor Raptor 4-Stack- 5.56 with Reflex 2" Mount AB Suppressor Raptor 4-Stack- 7.62 with Reflex 1" Mount

Built to serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners face, the RAPTOR comes in a variety of lengths based on spiral configurations. Each suppressor connects via the recommended REFLEX mounting system or flush mount.

The RAPTOR uses spiral shaped baffles to keep the gasses moving while reducing back pressure. The result is our flagship suppressor. Utilizing the REFLEX mounting options greatly increases the suppressor volume without increasing the overall length of the firearm. The RAPTOR comes in 5.56, 7.62, .338 and lengths from 2 spirals to 10 spirals and REFLEX mounting options from 1.00” to 8.00”.

The AB Spiral Versus Dead End Baffles

Plain and simple, our spirals are designed to be more efficient. Using spirals verses baffles gives the gases something to do rather than slamming into a wall or corner. By peeling gases off of the bore and sending them into a spin we can reduce the energy of those gases quickly and efficiently. As the gases lose energy the spiral can be fed with more gases. This spinning effect burns off energy rather than trying to stop it.


Raptor Technology
Titanium
With 100% Titanium construction, we achieve a longer life for the suppressor and also keep the weight at a minimum to allow for better accuracy and performance.

Spiral Technology
AB Spiral Technology significantly reduces the back pressure created with each shot. The reduced pressure also creates a much lower tone, making for a better shooting experience.


Welded Construction

Welded construction allows for an increased internal volume for optimal performance while adding durability to the overall build of the can.


High Temp Cerakote
Cerakote high temp is the industry-leading thin film coating. We choose this because it withstands Full Auto temperatures without failing.


Mounts and Endcaps
Interchangeable mounting systems and end caps allow the RAPTOR Series to be used on multiple calibers and platforms. Using the correct end cap for each caliber increases performance and is critical to maximum suppression.

Built to serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners face, the RAPTOR comes in a variety of lengths based on spiral configurations. Each suppressor connects via the recommended REFLEX mounting system or flush mount.

The RAPTOR uses spiral shaped baffles to keep the gasses moving while reducing back pressure. The result is our flagship suppressor. Utilizing the REFLEX mounting options greatly increases the suppressor volume without increasing the overall length of the firearm. The RAPTOR comes in 5.56, 7.62, .338 and lengths from 2 spirals to 10 spirals and REFLEX mounting options from 1.00” to 8.00”.

The AB Spiral Versus Dead End Baffles

Plain and simple, our spirals are designed to be more efficient. Using spirals verses baffles gives the gases something to do rather than slamming into a wall or corner. By peeling gases off of the bore and sending them into a spin we can reduce the energy of those gases quickly and efficiently. As the gases lose energy the spiral can be fed with more gases. This spinning effect burns off energy rather than trying to stop it.


Raptor Technology
Titanium
With 100% Titanium construction, we achieve a longer life for the suppressor and also keep the weight at a minimum to allow for better accuracy and performance.

Spiral Technology
AB Spiral Technology significantly reduces the back pressure created with each shot. The reduced pressure also creates a much lower tone, making for a better shooting experience.


Welded Construction

Welded construction allows for an increased internal volume for optimal performance while adding durability to the overall build of the can.


High Temp Cerakote
Cerakote high temp is the industry-leading thin film coating. We choose this because it withstands Full Auto temperatures without failing.


Mounts and Endcaps
Interchangeable mounting systems and end caps allow the RAPTOR Series to be used on multiple calibers and platforms. Using the correct end cap for each caliber increases performance and is critical to maximum suppression.

Built to serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners face, the RAPTOR comes in a variety of lengths based on spiral configurations. Each suppressor connects via the recommended REFLEX mounting system or flush mount.

The RAPTOR uses spiral shaped baffles to keep the gasses moving while reducing back pressure. The result is our flagship suppressor. Utilizing the REFLEX mounting options greatly increases the suppressor volume without increasing the overall length of the firearm. The RAPTOR comes in 5.56, 7.62, .338 and lengths from 2 spirals to 10 spirals and REFLEX mounting options from 1.00” to 8.00”.

The AB Spiral Versus Dead End Baffles

Plain and simple, our spirals are designed to be more efficient. Using spirals verses baffles gives the gases something to do rather than slamming into a wall or corner. By peeling gases off of the bore and sending them into a spin we can reduce the energy of those gases quickly and efficiently. As the gases lose energy the spiral can be fed with more gases. This spinning effect burns off energy rather than trying to stop it.


Raptor Technology
Titanium
With 100% Titanium construction, we achieve a longer life for the suppressor and also keep the weight at a minimum to allow for better accuracy and performance.

Spiral Technology
AB Spiral Technology significantly reduces the back pressure created with each shot. The reduced pressure also creates a much lower tone, making for a better shooting experience.


Welded Construction

Welded construction allows for an increased internal volume for optimal performance while adding durability to the overall build of the can.


High Temp Cerakote
Cerakote high temp is the industry-leading thin film coating. We choose this because it withstands Full Auto temperatures without failing.


Mounts and Endcaps
Interchangeable mounting systems and end caps allow the RAPTOR Series to be used on multiple calibers and platforms. Using the correct end cap for each caliber increases performance and is critical to maximum suppression.

AB Suppressor Raptor 6-Stack- 5.56 with Reflex 2" mount

Built to serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners face, the RAPTOR comes in a variety of lengths based on spiral configurations. Each suppressor connects via the recommended REFLEX mounting system or flush mount.

The RAPTOR uses spiral shaped baffles to keep the gasses moving while reducing back pressure. The result is our flagship suppressor. Utilizing the REFLEX mounting options greatly increases the suppressor volume without increasing the overall length of the firearm. The RAPTOR comes in 5.56, 7.62, .338 and lengths from 2 spirals to 10 spirals and REFLEX mounting options from 1.00” to 8.00”.

The AB Spiral Versus Dead End Baffles

Plain and simple, our spirals are designed to be more efficient. Using spirals verses baffles gives the gases something to do rather than slamming into a wall or corner. By peeling gases off of the bore and sending them into a spin we can reduce the energy of those gases quickly and efficiently. As the gases lose energy the spiral can be fed with more gases. This spinning effect burns off energy rather than trying to stop it.


Raptor Technology
Titanium
With 100% Titanium construction, we achieve a longer life for the suppressor and also keep the weight at a minimum to allow for better accuracy and performance.

Spiral Technology
AB Spiral Technology significantly reduces the back pressure created with each shot. The reduced pressure also creates a much lower tone, making for a better shooting experience.


Welded Construction

Welded construction allows for an increased internal volume for optimal performance while adding durability to the overall build of the can.


High Temp Cerakote
Cerakote high temp is the industry-leading thin film coating. We choose this because it withstands Full Auto temperatures without failing.


Mounts and Endcaps
Interchangeable mounting systems and end caps allow the RAPTOR Series to be used on multiple calibers and platforms. Using the correct end cap for each caliber increases performance and is critical to maximum suppression.